MOTOR CONTROL CENTER
The Motor Control Center is an ideal switchboard for the command and protection of electrical motors.
The drawers allow any type of use. Each column can have up to 10 drawers. The module drawers range from 200 mm increasing by 100mm up to 800 mm. The removable drawers allows rapid substitution with the board in function. All the drawers of equal size are exchangeable between them for maximum flexibility and continuity of the equipment function.
With the door closed the drawer can take any of the following positions:Draw-out (power grips and auxiliary connector isolated)Test (power grips isolated and auxiliary connecter inserted)
Inside the compartment, with the drawer removed IP 2X protection is guaranteed by use of automatic shutters made of isolating material which segregate the voltage parts.
It is possible to connect cables up to a section of 120 mm2 to the power connector. Use of mechanical interlocks inhibits sectioned of the drawer when loaded. The size of the drawer is determined on the basis of the type of use and on the components necessary for the proper functioning of the motor.
Each column is equipped with a side compartment for connection of the power cables and auxiliary. The compartments are equipped with special supports that facilitate cable fixing. The minimum width of these compartments is 210 mm, which can be increased in accordance with the needs of the customer. The cable entry can be done in the switchboard from the top or from the bottom. Accessibility to the board for any maintenance works is from the front
برند
Alfaquadri
اولین کسی باشید که دیدگاهی می نویسد “MOTOR CONTROL CENTER”
محصولات مرتبط
اتوماسیون صنعتی
اتوماسیون صنعتی
اتوماسیون صنعتی
اتوماسیون صنعتی
اتوماسیون صنعتی
اتوماسیون صنعتی
اتوماسیون صنعتی
اتوماسیون صنعتی
نقد و بررسیها
هیچ دیدگاهی برای این محصول نوشته نشده است.